Continuous damage model for structural steels and weld metals under ultra-low-cyclic loading

For the fracture problem of structural steel under strong earthquakes, a continuous damage model which comprehensively considers the influence of stress triaxiality and Lode parameter was proposed in this paper. According to the variation law of Mises stress under cyclic loading, this model decomposes the effective cumulative plastic strain into isotropic hardening and kinematic hardening components, assuming a linear proportional relationship between the fatigue damage induced by these two components. The basic mechanical properties and constitutive relationships of five common Chinese structural steels and four corresponding weld metals were investigated. The fracture failure tests for both notched round bar specimens and pure shear specimens subjected to monotonic tensile and ultra-low-cyclic loading were thoroughly examined on these materials. The continuous damage model parameters were calibrated by means of test results and complementary finite element simulations. Experimental and numerical simulation results indicate that Q690 high strength steel exhibits cyclic softening behavior, whereas the other steels show cyclic hardening characteristics. For pure shear specimens, plane strain specimens and shear energy dissipation cover plates, the continuous damage model was adopted to simulate and analyze the damage development and fracture failure process of the specimens. The predictions for crack initiation, crack propagation and fatigue life are consistent with experimental results, lending further credibility to the model. The calibrated continuous damage model of various steels provides an effective means for analyzing the ULCF fracture failure of structural steel under intense earthquakes.