Photo-curable bio-based comb/bottle brush epoxy resin/beeswax/copper foam phase change materials with high enthalpy value, high conductivity, and multifunctional properties

At present, the demand for green energy has reached a new height in history, and thermal energy storage technology has been widely used to reduce energy consumption. It is still a challenge to develop bio-based polymeric form-stable phase change materials (FSPCMs) with high enthalpy value and thermal conductivity (TC), short curing time, and multifunctional properties. This work not only exploited a series of adjustable and photo-curable comb/bottle brush bio-based epoxy resin/beeswax (bw) FSPCMs with the above superiorities, but also revealed the effects of cross-linking density on the energy storage capacity and encapsulation rate of the FSPCMs. As a result, the optimal system can encapsulate the maximum amount of bw (60 wt%) and obtain the highest enthalpy value (142.1 J/g) with only 0.5% enthalpy loss. Through further introducing the optimal curing system into the copper (Cu) foam, the electromagnetic interference shielding property, TC, tensile strength, and photo-thermal conversion efficiency of the final composite (modified by Cu of 95% porosity) can reach 110 dB, 2.387 W m- 1K- 1, 2.81 MPa, and 80%, respectively, and the enthalpy value (84.2 J/g) is still satisfactory. This study can provide theoretical guidance for the structural design of reliable fast photo-curable bio-based polymeric FSPCMs with excellent phase change performances and multifunctional properties.