The effect of inclusions and pores on creep crack propagation of linear friction welded joints of GH4169 superalloy

Superalloy has become the key material in components of blisks for aero-engines produced by linear friction welding. However, during the long-term service of the blisks, stress rupture occurs on the blisk under long-term creep. In this study, the linear friction welded joints of GH4169 superalloy were studied with experiments and numerical simulation. The Sin-Hyperbolic creep-damage constitutive model was established. Based on the compact tension specimen model, the numerical simulation of crack propagation was carried out, analyzing the effect of defects in linear friction welded joints such as cracks, inclusions, and pores on creep crack propagation. Results show that inclusions have an impact on the deflection and promotion of creep crack propagation. The maximum values of crack propagation rate can be observed when radius is 0.03 mm for circular inclusions and length-to-diameter ratio is 3 for elliptical inclusions, respectively. When the transverse distance between the center of the pore and the crack tip is 0.6 mm, the effect on crack propagation is the most significant, with the crack deflecting and expanding towards the direction of the pore. The effect of elliptical pores on creep crack propagation is more significant than that of circular pores. When the length-to-diameter ratio is 3, cracks have initiated firstly on both sides of elliptical pores. When the angle between the pore and the prefabricated crack is 0°, the elliptical pore has the greatest deflection effect on the creep crack. Overall, the effect of pores on creep crack propagation is stronger than that of inclusions.