Stabilizing Flow of Molten Steel in Mold during Slab Continuous Casting through Electromagnetic Swirling Flow in Nozzle

Bias flow of molten metal in slab mold caused by unstable flow from submerged entry nozzle can deteriorate the slab quality during continuous casting. In this study, a novel electromagnetic swirling flow in nozzle (EMSFN) technique, which utilizes electromagnetic force to stabilize the flow in the nozzle and subsequently control the flow in the mold, is proposed. The mechanism for controlling unstable flow through EMSFN is explored through numerical simulation and water model experiments. In the results, it is shown that the molten steel is rotated under the effect of magnetic field and flows into the mold along the upper edge of the nozzle outlet, which weakens the impact of molten steel on the bottom of nozzle and stabilizes the outflow from nozzle. The flow field is consistently symmetrical on both sides of the nozzle. The impact depth of molten steel flowing down along the narrow sides of the mold on both sides is greatly reduced. The surface velocity on both sides of the nozzle changes uniformly. The range of surface velocity variation with EMSFN is only 10% of that with a conventional nozzle. The EMSFN technique can help prevent slag entrapment and improve the flotation of inclusions and bubbles. A novel electromagnetic swirling flow in nozzle (EMSFN) technique is proposed, which utilizes electromagnetic force for stabilizing the flow in nozzle and subsequently controlling the flow in mold during slab continuous casting. The results indicate that with the effect of EMSFN, the flow field and surface velocity on both sides of the nozzle are constantly symmetrical and change uniformly.image (c) 2024 WILEY-VCH GmbH