High discharge energy density in rationally designed graphene oxide@zinc oxide/polymer blend-polyetherimide heterostructured bilayer nanocomposites

The advancement of new dielectric materials exhibiting greater discharge energy density is crucial for current power systems and electronic devices. In this work, various weight percentages of graphene oxide@zinc oxide (GO@ZO) nanofillers were incorporated inside a polymer blend of poly(vinylidene fluoride-hexafluoropropylene)/polyetherimide (P(VDF-HFP)/PEI; shortened as BP) and used as a high dielectric top layer. In contrast, linear-type PEI (L) was used as a bottom insulation layer to achieve a high breakdown strength (E-b) in bilayer nanocomposites. As a result, the 2BP-L composite demonstrated a high discharged energy density of 12.63 J/cm(3) at an electric field of 527 MV/m with only 2 wt% GO@ZO nanofillers addition in the top layer. Such a high discharge energy density with minimal nanofiller loading is attributed to the utilization of novel surface-decorated GO@ZO nanofillers and new bilayer-heterostructured linear/ferroelectric-linear polymer. In comparison to its counterparts (i.e., PEI, P(VDF-HFP) and 0BP-L), the 2BP-L nanocomposite showed similar to 426.3 %, 92.5 %, and 9.8 % enhancement in discharge energy density, respectively. The discharge rate and stability analysis revealed a significantly higher power density of 0.55 MW/cm(3), indicating its high potential to be used as a pulsed power system. Finite element simulation revealed that the effective internal electric field distribution and higher dielectric displacement in 2BP-L resulted in such enhancement over its counterparts. This study presents a new model to maximize the energy storage capability of flexible energy storage devices and advances knowledge of the polarization mechanisms and breakdown of bilayer nanocomposite dielectric materials.