Suitable Integral Sampling for Bandpass-Sampling Time-Modulated Fourier Transform Spectroscopy

For traditional Fourier transform (FTS), its integral sampling usually meets the Spectral Modulation Transfer Function (SMTF) criterion. However, for bandpass-sampling Fourier transform spectroscopy (BPS-FTS), based on our analysis, the integral sampling condition derived from the Spectral Modulation Transfer Function (SMTF) is excessively stringent. In other words, the interval of the integral sampling time that fulfills the tolerance requirements for the reconstructed spectrum is very narrow. There are numerous integration sampling time intervals outside this range that still meet the tolerance requirements for the reconstructed spectrum. In this paper, through theoretical modeling, we propose a method based on average |SMTF| as the selection criterion for the integration sampling time. Through simulation analysis, it is evident that the intervals and range of the integral sampling time obtained via this method are more accurate, ensuring the tolerance requirements of the reconstructed spectrum. Under these intervals, when conducting integral sampling on the interferogram, the spectral deviation of the reconstructed spectrum is minimal, and the Spectral Correlation Mapper (SCM) is nearly equal to one. This indicates that compared with the SMTF criterion in traditional FTS, this method is more suitable for the characteristics of BPS-FTS. The analysis in this paper can provide theoretical and simulation support for the implementation of BPS-FTS.