Low-temperature antiferromagnetism in quaternary Mn₂FeSi_0.5Al_0.5 alloys

In this work, the quaternary Mn2FeSi0.5Al0.5 alloys are prepared for the first time in the form of cylinder-shaped ingots by traditional induction melting technique followed by homogenization annealing at 773 K for 100 h. The microstructural and magnetic properties of as-cast and annealed Mn2FeSi0.5Al0.5 samples are analyzed in detail and compared to the Mn2FeSi and Mn2FeAl ternary alloys. The Mn2FeSi0.5Al0.5 ingots are two-phase both before and after annealing, and their diffractograms correspond to the primitive cubic beta-Mn structure. Obtained lattice constant of 0.6274 nm is only slightly lower than that of Mn2FeAl alloy (0.6339 nm) and different from Mn2FeSi (0.5672 nm). The existence of both phases enriched in Si at the expense of Al and Mn was confirmed by differential thermal analysis showing two endothermic and exothermic peaks at temperatures of 1363 K and 1407 K. The magnetic properties of both quaternary samples studied in wide temperature range from 5 K to 573 K indicate paramagnetic behavior at room and elevated temperatures. The annealed system has the values of Curie temperature and effective paramagnetic moment comparable to the ternary Mn2FeAl alloy. The transition to antiferromagnetic state occurring at Neel temperatures of 34 K (as-cast sample) and 37 K (annealed sample) is caused by strong geometric frustration of beta-Mn structure. The magnetic transitions observed in both samples between Neel and room temperature are discussed in terms of the existence of Griffiths phase.