Comparing Mn-based oxides filters started by KMnO4 versus K2 FeO4 for ammonium and manganese removal: Formation mechanism of active species

A pilot-scale filtration system was adopted to prepare filter media with catalytic activity to remove manganese (Mn2 +) and ammonium (NH4+ -N). Three different combinations of oxidants (KMnO4 and K2FeO4) and reductants (MnSO4 and FeCl2) were used during the start-up period. Filter R3 started up by KMnO4 and FeCl2 (Mn7 +-> MnOx) exhibited excellent catalytic property, and the NH4 + -N and Mn2+ removal efficiency reached over 80% on the 10th and 35th days, respectively. Filter R1 started up by K2FeO4 and MnSO4 (MnOx <- Mn2 +) exhibited the worst catalytic property. Filter R2 started up by KMnO4 and MnSO4 (Mn7 +-> MnOx <- Mn2 +) were in between. According to Zeta potential results, the Mn-based oxides (MnOx) formed by Mn7 + -> MnOx performed the highest pHIEP and pHPZC. The higher the pHIEP and pHPZC, the more unfavorable the cation adsorption. However, it was inconsistent with its excellent Mn2+ and NH4+ -N removal abilities, implying that catalytic oxidation played a key role. Combined with XRD and XPS analysis, the results showed that the MnOx produced by the reduction of KMnO4 showed early formation of buserite crystals, high degree of amorphous, high content of Mn3+ and lattice oxygen with the higher activity to form defects. The above results showed that MnOx produced by the reduction of KMnO4 was more conducive to the formation of active species for catalytic oxidation of NH4+ -N and Mn2+ removal. This study provides new insights on the formation mechanisms of the active MnOx that could catalytic oxidation of NH4+-N and Mn2 +. (c) 2024 The Research Center for Eco-Environmental Sciences, Chinese Academy of Sciences. Published by Elsevier B.V.