Optimum Design Process of Coaxial Magnetic Gear Using 3D Performance Prediction Method Considering Axial Flux Leakage
IEEE Transactions on Industry Applications(2023)
摘要
This paper proposes a rapid and optimum design method that considers axial flux leakage for a coaxial magnetic gear (CMG). Conventional CMG optimum design methods perform two-dimensional (2D) finite element analysis (FEA) to evade the long computational time of three-dimensional (3D) FEA. However, conventional design methods do not consider axial flux leakage and are therefore less accurate than computationally exhaustive optimum design through 3D FEA. Therefore, as an alternative to reduce computational time, this study proposes a method that considers axial flux leakage for predicting the CMG performance combining correlation coefficients and 2D FEA instead of 3D FEA. The correlation coefficient is determined as the ratio of the square of the radial direction air gap flux in the equivalent magnetic circuit (EMC) that considers axial flux leakage to the square of the radial direction air gap flux in the EMC that does not consider axial flux leakage. The electromagnetic performance of the CMG predicted by the proposed method is used to develop a surrogate model for reducing computational time during the optimum design process. Based on the surrogate model, the optimum CMG design is analyzed to fabricate a prototype, and the proposed design process is validated through experiments.
更多查看译文
关键词
Axial flux leakage,coaxial magnetic gear (CMG),equivalent magnetic circuit (EMC),multi-objective optimization
AI 理解论文
溯源树
样例
![](https://originalfileserver.aminer.cn/sys/aminer/pubs/mrt_preview.jpeg)
生成溯源树,研究论文发展脉络
Chat Paper
正在生成论文摘要