谷歌浏览器插件
订阅小程序
在清言上使用

Evaluation of slope stability through rock mass classification and kinematic analysis of some major slopes along NH-1A from Ramban to Banihal, North Western Himalayas

Journal of Rock Mechanics and Geotechnical Engineering(2024)

引用 1|浏览3
暂无评分
摘要
The network of Himalayan roadways and highways connects some remote regions of valleys or hill slopes, which is vital for India's socio-economic growth. Due to natural and artificial factors, frequency of slope instabilities along the networks has been increasing over last few decades. Assessment of stability of natural and artificial slopes due to construction of these connecting road networks is significant in safely executing these roads throughout the year. Several rock mass classification methods are generally used to assess the strength and deformability of rock mass. This study assesses slope stability along the NH-1A of Ramban district of North Western Himalayas. Various structurally and non-structurally controlled rock mass classification systems have been applied to assess the stability conditions of 14 slopes. For evaluating the stability of these slopes, kinematic analysis was performed along with geological strength index (GSI), rock mass rating (RMR), continuous slope mass rating (CoSMR), slope mass rating (SMR), and Q-slope in the present study. The SMR gives three slopes as completely unstable while CoSMR suggests four slopes as completely unstable. The stability of all slopes was also analyzed using a design chart under dynamic and static conditions by slope stability rating (SSR) for the factor of safety (FoS) of 1.2 and 1 respectively. Q-slope with probability of failure (PoF) 1% gives two slopes as stable slopes. Stable slope angle has been determined based on the Q-slope safe angle equation and SSR design chart based on the FoS. The value ranges given by different empirical classifications were RMR (37–74), GSI (27.3–58.5), SMR (11–59), and CoSMR (3.39–74.56). Good relationship was found among RMR & SSR and RMR & GSI with correlation coefficient (R2) value of 0.815 and 0.6866, respectively. Lastly, a comparative stability of all these slopes based on the above classification has been performed to identify the most critical slope along this road.
更多
查看译文
关键词
Rock mass classification,Kinematic analysis,Slope stability,Himalayan road,Static and dynamic conditions
AI 理解论文
溯源树
样例
生成溯源树,研究论文发展脉络
Chat Paper
正在生成论文摘要