Mask correction method for surface plasmon lithography

Surface plasmon lithography (SPL) has emerged as an innovative approach to nano-fabrication, offering an alternative to traditional patterning methods. To enhance its pattern fidelity in manufacturing, it is essential to incorporate mask correction to reduce critical dimension (CD) errors between the intended target features and the photoresist image. Traditionally, the aerial image of SPL has been modeled and simulated using methods such as finite difference time domain (FDTD) or rigorous coupled wave analysis (RCWA). These models have allowed us to obtain aerial images of the mask patterns. However, relying solely on the aerial image proves insufficient for meeting the rigorous manufacturing standards for mask correction. In our research, we propose a comprehensive model that combines the optical model, employing the FDTD method, and the resist model, tailored to the specific surface plasmon lithography process. Test patterns were meticulously designed with a target CD of 130 nm, and the model was applied to simulate these test patterns, producing the after-development image (ADI) under predefined process conditions. Following a thorough analysis and data processing of the test patterns and ADI data, we established rule tables for the correction of both 1D line patterns and line end patterns. The simulation results unequivocally demonstrate the improved CD error performance achieved by the post-corrected patterns. (c) 2024 Optica Publishing Group