Static strain aging in cold rolled stable austenitic stainless steel

The effects of cold rolling reduction ratio, initial grain size, and aging condition (temperature and time) on static strain aging (SSA) behavior were systematically investigated in stable austenitic stainless steel. The aging treatment increased the yield strength (YS) and ultimate tensile strength (UTS), and the SSA effect was more pronounced at higher reduction ratio or smaller initial grain size. The SSA effect occurred in the temperature range of 400 similar to 600 degrees C, where the accumulated dislocations remained in the form of wavy boundaries. Quantifying the dislocation density clearly showed that the SSA effect was directly related to the dislocation density. The volume shrinkage and increase in thermal expansion coefficient by aging treatment suggested the correlation between SSA behavior and atomic distribution changes. 3D atom probe tomography analysis clearly exhibited the clustering and segregation of solute C atoms during aging treatment. These results suggest that the SSA effect may be attributed to the interaction between solute C atoms and dislocations. Through grain refinement and optimal aging treatment at 500 degrees C for 1 h, the YS and UTS were significantly increased by 319 MPa and 230 MPa, respectively, to obtain a non-magnetic stainless steel with ultrahigh YS of up to 1600 MPa.