Study on the influence law of cavities behind the shotcrete lining on the lattice girders

The field monitoring data showed that a small amount of main reinforcement bars of lattice girder at the arch of a tunnel were pulled, and the calculation showed that the initial support structure should be compressed. To find out the reason for the tension of the main reinforcement, the geological radar was used to detect the cavity in the sprayed concrete layer at the tension position. In order to clarify the tension mechanism of the main reinforcement and the influence of factors such as the position and size of the cavity on the main reinforcement, numerical simulations were carried out. The results show that the cavity causes the eccentric compression of the shotcrete layer, resulting in moment of the lattice girder and the change of the stress distribution of the main reinforcement. The main reinforcement experiences tensile stress when the cavity size surpasses 3 m × 0.2 m, reaching a tensile stress of 81 MPa at a cavity size of 6 m × 0.2 m. Notably, the cavity located at the foot of the arch is more likely to produce substantial tensile stress on the primary reinforcement compared to those at the arch crown and waist. The research results provide a theoretical basis for the interpretation and analysis of tunnel lattice girder monitoring data.