Green synthesis of Ag2O & facile synthesis of ZnO and characterization using FTIR, bandgap energy & XRD (Scherrer equation, Williamson-Hall, size-train plot, Monshi- Scherrer model)

A typical study has been performed for synthesizing Ag2O and ZnO nanoparticles. In our case, aloe vera extract was used as a reducing agent for synthesizing Ag2O. This green synthesis of silver oxide used silver nitrate (AgNO3) as a precursor material. On the other hand, the direct precipitation method was used for synthesizing zinc oxide nanoparticles, in which the precursor materials used were zinc nitrate hexahydrate (Zn(NO3)2.6H2O) and potassium hydroxide (KOH). Afterward, the characterization of these synthesized nanoparticles was done by the X-ray diffraction (XRD) method. Then, the crystal size, lattice strain, stress, and energy density of synthesized ZnO and Ag2O were determined by using XRD peak profile analysis. Among the various available models for determining these microstructural parameters, we explored the Scherrer model, the linear straight-line method of the Scherrer equation, the Monshi-Scherrer model, the Sahadat-Scherrer model, the Williamson -Hall model (including the uniform deformation model, the uniform stress deformation model, the uniform deformation energy density model), the size -strain plot method, the Halder-Wagner model, etc. By employing the crystal size values from these models, the accuracy and validity of crystals were also performed. The synthesized products were also characterized by the exploration of functional groups (by FTIR) and optical band gaps (by UV technique).