Coal pillar destabilization prediction and mining method in residual mining areas under remining disturbances

To address the problem of pillar instability in residual mining areas under repeated mining disturbances, the prediction of pillar instability time and mining technology is studied by using numerical simulations, theoretical examinations, and practical experimentation techniques utilizing the remaining facade of the Shenghua Coal Industry 3103. On the basis of the findings, employing a fully mechanized mining technique exerts greater pressure on the coal pillar, increasing the likelihood of plastic failure. However, adopting the segmental filling mining approach can effectively disperse this pressure, consequently mitigating potential damage to the coal pillar. Initially, the coal pillar undergoes a progressive yielding or collapsing process at its periphery, leading to instability once the area of the projectile core of the coal pillar decreases beyond a specific threshold. The dimensions of both the affected roadway and the coal pillar play a pivotal role in determining the coal pillar's load-bearing capacity. A prediction model for pillar instability is established. If the area of the projectile core is less than 34% during remining, the mining method should be changed or pillar reinforcement should be implemented. The accurate prediction and adaptation of the model's mining approach ensure the secure extraction of coal pillars within the remaining mining region, with successful validation of the model's performance. The instability failure mechanism of the remaining coal pillar is studied, and the coal pillar instability prediction model is constructed. By predicting the state of the coal pillar in the field test and adjusting the mining mode, the safe mining of the coal pillar is successfully guaranteed, and the effectiveness of the model is verified.image