Experimental Study and Numerical Analysis of Temperature Stress in Carbon Fiber-Heated Concrete Pavement

Carbon fiber heating technology has been widely used in pavement surfaces in practical engineering projects as an environmentally friendly, efficient, and safe ice melting technique. However, the current design of carbon fiber-heated pavement focuses primarily on the ice melting effect while neglecting the crucial mechanical performance evaluation. Therefore, this study aims to investigate the temperature and thermal strain distributions of concrete pavement through model tests and develop a corresponding three-dimensional numerical model to analyze the temperature stress field distribution of carbon fiber-heated pavement. The accuracy of the numerical model is verified by comparing the model test results with the numerical analysis results. The numerical model test results indicate that the maximum compressive stress near the carbon fiber wire is 4 MPa, while the maximum tensile stress between the two carbon fiber wires is 1 MPa. According to the design standard for highway cement concrete pavement, the temperature stress induced by temperature change is significantly lower than the design value of the material's inherent strength. In addition, a linear relationship between the depth and temperature gradient affecting temperature stress is observed after establishing a correlation between the temperature gradient and temperature stress. The findings of this study can provide valuable insight into the design of carbon fiber-heated concrete pavements.