Hydrothermally synthesized MXene Ti3C2/Zn2SnO4 based nanocomposite for H2S sensing at room temperature

Hydrogen sulfide (H2S) gas sensors with high response and minimum limit of detection at room temperature are of great importance to ensure the safety of humans and the environment. A series of samples such as MXene Ti3C2, Ti3AlC2, WS2, MoSe2/Zn2SnO4 and spherical Zn2SnO4 nanoparticles were synthesized via hydrothermal method in this paper. Different characterizations were performed on these samples to check crystal structures, morphologies, chemical states, etc. And gas sensing properties were also performed and analyzed deeply. A series of sensor sheets were fabricated via the spin coating method based on synthesized samples for gas sensing properties. MXene Ti3C2/Zn2SnO4-5 based gas sensor detected the highest response (110) towards 8 ppm H2S with excellent selectivity, the minimum limit of detection (0.01 ppm), mediate long-term stability and good reproducibility compared with other fabricated sensors at room temperature. Also, the sensor response was increased with the increase of H2S concentration. Experimental results showed that the highest response of Ti3C2/Zn2SnO4-5 based gas sensor was accredited to heterojunction, higher BET surface area, and increased oxygen species. The simple way synthesized nanocomposite and fabricated sensors throw a novel idea for tracing H2S at the lowest concentration to prevent different diseases.