Solution-processed Sb₂Se₃ photocathodes under Se-rich conditions and their photoelectrochemical properties

In this study, selenium (Se)-rich antimony selenide (Sb2Se3) films were fabricated by applying a solution process with the solvents ethylenediamine and 2-mercaptoethanol to optimize the photoelectrochemical (PEC) performance of the Sb2Se3 photocathode. Various antimony (Sb)-Se precursor solutions with different molar ratios of Sb and Se (Sb : Se = 1 : 1.5, 1 : 3, 1 : 4.5, 1 : 7.5, and 1 : 9) were prepared to attain Se-rich fabrication conditions. As a result, the Se-rich Sb2Se3 films fabricated using the Sb-Se precursor solution with a molar ratio of Sb : Se = 1 : 7.5 exhibited an improved PEC performance, compared to the stoichiometric Sb2Se3 film. The charge transport was improved by the abundant Se element and thin selenium oxide (Se2O3) layer in the Se-rich Sb2Se3 film, resulting in a decrease in Se vacancies and substitutional defects. Moreover, the light utilization in the long wavelength region above 800 nm was enhanced by the light-trapping effect because of the nanowire structure in the Se-rich Sb2Se3 film. Hence, the optimal Se-rich Sb2Se3 photocathodes showed an improved photocurrent density of -0.24 mA cm(-2) at the hydrogen evolution reaction potential that was three times higher than that of the stoichiometric Sb2Se3 photocathodes (-0.08 mA cm(-2)).