Development Of Raspberry Pi-based Processing Unit for UV Photon-Counting Detectors

In ultraviolet (UV) astronomical observations, photons from the sources are very few compared to the visible or infrared (IR) wavelength ranges. Detectors operating in the UV usually employ a photon-counting mode of operation. These detectors usually have an image intensifier sensitive to UV photons and a readout mechanism that employs photon counting. The development of readouts for these detectors is resource-intensive and expensive. In this paper, we describe the development of a low-cost UV photon-counting detector processing unit that employs a Raspberry Pi with its in built readout to perform the photon-counting operation. Our system can operate in both 3x3 and 5x5 window modes at 30 frames per sec (fps), where 5x5 window mode also enables the provision of detection of double events. The system can be built quickly from readily available custom-off-the-shelf (COTS) components and is thus used in inexpensive CubeSats or small satellite missions. This low-cost solution promises to broaden access to UV observations, advancing research possibilities in space-based astronomy.