Characterization of textile effluent treatment plant sludge and its industrial application in fired clay bricks with health risk assessment

The textile industry in Bangladesh faces environmental and health challenges due to the disposal of solid waste from Effluent Treatment Plants (ETPs). To address this issue, a study was conducted using soil from a brick industry near Dhaka, amending it with varying amounts of dry sludge to create clay bricks. The original soil had a loam texture and medium plasticity. The research found that adding 9 wt% of sludge resulted in Grade A commercial bricks with a compressive strength of 15.33 MPa and water absorption of 13.33 wt%, meeting BDS 208 standards. However, these sludge-incorporated bricks experienced more shrinkage during the burning process due to organic content, requiring additional soil to maintain conventional dimensions. Also, to assess the health hazards of these sludge-incorporated bricks, a leaching test was performed, revealing that no toxic heavy metals (Pb, Cd, Cr, Cu, Ni, and Zn) in the leachate exceeded the limits set by the United States Environmental Protection Agency (USEPA). The study indicates that textile ETP sludge can serve as a sustainable raw material for bricks, potentially reducing the environmental burden caused by textile sludge disposal by 28.75%. This innovative approach offers a promising solution to both environmental and health concerns associated with textile waste in Bangladesh's industrial sector.