Comparative study on performance of counter-flow dew-point indirect evaporative cooling systems via a more realistic and experimentally validated three-dimensional model

Dew-point indirect evaporative cooling (DPIEC) technology is designed and applied as a low carbon-emission and high energy-efficient air conditioning (AC) solution without employing nonenvironmentally friendly refrigerant and mechanical compressor for cooling in building sector. A more realistic three-dimensional (3-D) model of the DPIEC that better captures the fundamental thermodynamic of its operation is proposed. It considers the variability of air thermal properties and is employed to investigate the DPIEC's performance for three possible arrangements. The 3-D model is classified as configurations 1, 2 and 3 based on the relative flow direction between primary/secondary air and spray water. Experimental results indicate that the model can well evaluate the thermodynamic performance. Additionally, the influence of crucial factors on the performance is parametrically studied by employing three performance indexes. Comparison reveals that configuration 1 can achieve the highest effectiveness and cooling capacity. Results also show that the secondary-to-primary air ratio should be confined to around 0.3 to achieve maximum cooling capacity, and the optimal channel gap should be limited to the range from 3 to 4 mm. Comparatively, the relative flow direction between the spray water and the primary/ secondary air has a greater effect on the thermodynamic performance than the spray water inlet velocity.