Investigation of heat transfer characteristics in air-to-air heat exchanger with steady flow, oscillating flow and sound waves

A steady flow with a high flow rate, oscillating flow, and audible sound waves can enhance the heat transfer performance in air-to-air heat exchangers, while the comparison of influence mechanisms and degrees of different methods is ignored. This study investigates flow instability and heat transfer characteristics in an air-toair heat exchanger under steady flow, oscillating flow and sound waves. The results show that steady flow and oscillating flow with different amplitudes have little effect on the distribution characteristics of velocity and vortices. However, the vortices disappear and generate periodically under 140 dB. Moreover, oscillating flow and sound waves exert distinct influences on flow instability. The cold side experiences the highest increase in turbulence kinetic energy when subjected to high-amplitude oscillating flow, while the greatest increase on the hot side occurs under high-amplitude sound waves, and the influence of steady flow on turbulence kinetic energy is relatively low. Additionally, the steady flow enhances the heat transfer performance by increasing flow rate, while the oscillating flow and sound waves promote the heat transfer between the fluid and surface. Under the effect of steady flow, oscillating flow, and sound waves, the values of heat flux are 1.22, 1.24, and 1.31 times that of the initial condition with the amplitude increasing to 0.683 m/s (140 dB). The results demonstrate that with the increase in amplitude acting on the inlet, the sound waves have the greatest impact on heat transfer performance, followed by oscillating flow, and the effect of steady flow is relatively slight. The research can provide guidelines for the development of heat transfer enhancement in air-to-air heat exchangers.