Improving Welding Penetration and Mechanical Properties via Activated-Flux Smearing by Tungsten Inert Gas Arc Welding

For the welding process of thick-walled structural components in liquid rocket engines, the activated-flux TIG method can effectively address issues such as the formation of intermetallic phases in the weld seams, thereby enhancing mechanical performance. The present study investigates the activated-flux TIG welding technique on 10mm thick 1Cr21Ni5Ti duplex stainless steel plates. Various activated-flux, including -SiO2, TiO2, V2O5, NiO, MnO2, CaO, AlCl3, CaF2, B2O3 Cr2O3, and Al2O3, were examined to understand their impact on the weld-bead geometry. The aim was to determine the optimal activator ratio for the effective welding of 1Cr21Ni5Ti duplex stainless steel. The weld-shift experiment confirmed that the deep penetration observed in flux-assisted welding is attributed to Marangoni convection in the molten pool. Comprehensive evaluations and analyses were performed on the microstructure and mechanical properties of the normal welded joint and the A-TIG welded joint. Finally, the study delves into a discussion on the factors influencing changes in the weld penetration, microstructure, and mechanical properties of the weld.