Segmenting/Pre-Processing Data from Bone Screw Thread-Stripping Tests.

Bone screws must be appropriately tightened to achieve optimal patient outcomes. If over-torqued, the threads formed in the bone may break, compromising the strength of the fixation; and, if under-torqued, the screw may loosen over time, compromising the stability. Previous work has proposed a model-based system to automatically determine the optimal insertion torque. This system consists of a reverse-modelling step to determine strength, and a forward modelling step to determine maximum torque. These have previously been tested in isolation, however future work must test the combined system. To do so, the data must be segmented and pre-processed. This was done based on specific features of the recorded data. The methodology was tested on 50 screw-insertion data sets across 5 different materials. With the parameters used, all data sets were correctly segmented. This will form a basis for the further processing of the data and validating the combined systemClinical relevance: The system for torque limit determination must be tested in its entirety to properly asses its performance. This paper discusses some of the steps required to pre-process the data to make this assessment. If successful, this system may improve patient outcomes in orthopaedic surgery.