BIM-SLAM: Integrating BIM Models in Multi-session SLAM for Lifelong Mapping using 3D LiDAR

BIM-SLAM: Integrating BIM Models in Multi-session SLAM for Lifelong Mapping using 3D LiDAR Miguel Arturo Vega Torres, Alex Braun, André Borrmann Pages 521-528 (2023 Proceedings of the 40th ISARC, Chennai, India, ISBN 978-0-6458322-0-4, ISSN 2413-5844) Abstract: While 3D Light Detection and Ranging (LiDAR) sensor technology is becoming more advanced and cheaper every day, the growth of digitalization in the Architecture, Engineering and Construction (AEC) industry contributes to the fact that 3D building information models (BIM models) are now available for a large part of the built environment. These two facts open the question of how 3D models can support 3D LiDAR long-term Simultaneous Localization and Mapping (SLAM) in indoor, Global Positioning System (GPS)-denied environments. This paper proposes a methodology that leverages BIM models to create an updated map of indoor environments with sequential LiDAR measurements. Session data (pose graph-based map and descriptors) are initially generated from BIM models. Then, real-world data is aligned with the session data from the model using multi-session anchoring while minimizing the drift on the real-world data. Finally, the new elements not present in the BIM model are identified, grouped, and reconstructed in a surface representation, allowing a better visualization next to the BIM model. The framework enables the creation of a coherent map aligned with the BIM model that does not require prior knowledge of the initial pose of the robot, and it does not need to be inside the map. Keywords: BIM, Multi-Session SLAM, Pose-Graph Optimization, Localization, Mapping, 3D LiDAR. DOI: https://doi.org/10.22260/ISARC2023/0070 Download fulltext Download BibTex Download Endnote (RIS) TeX Import to Mendeley Presentation Video: https://youtu.be/5WgPRRijI4Y