Numerical Simulation on Wind Speed Amplification of High-Rise Buildings with Openings

To explore the influence of openings on wind loads and wind speeds in high-rise buildings, the wind flow around three-dimensional (3D) square cylinders with a breadth/height aspect ratio of 1:6 was numerically simulated using the large eddy simulation (LES) method via the Fluent 15.0 platform. The opening measures in the X-direction, Y-direction and both directions were all taken into consideration. Firstly, the inflow turbulence synthesis method and parameter settings for LES were verified by comparing the simulation results of standard square cylinders with those of wind tunnel experiments, and the optimal boundary conditions were determined. Then, the wind speed was extracted and compared with the mean wind speed of incoming flow at the same height to analyze the influence of different opening measures on the wind speed of incoming flow by setting monitoring points in the open holes. Finally, the mechanism underlying the effect of the opening form on wind loads and wind speeds was analyzed from the perspective of time-averaged and transient flow field. The results show that the X-direction openings affect the magnitude and distribution of the surface wind pressures by changing the flow separation and flow reattachment. The narrow tube effect can significantly increase the wind speed, while the Y-direction openings have no obvious improvement effect on the surface wind pressures of the structure. The wind speeds in the open holes are greatly reduced due to the shielding effect, and the wind pressures are also reduced for the Y-direction openings. In the X-direction opening holes, the wind speed at the monitoring point increases, while it decreases in the crosswind open holes. In general, the measure of openings in the X-direction can greatly improve the wind load of the structure compared to openings in the Y-direction, and it can provide a good reference for wind power generation in high-rise buildings.