A study on the aerodynamic behaviors learned from microscopy imaging of beetle corrugated hindwing

Beetle hindwings have the unique advantages of lightweight and high strength, which play a key role in flight. In this study, the beetle hindwings were cut along the chordal direction, then the first groove microstructure of different vein cross sections was investigated using the 3D microscope system and the laser scanning confocal microscope. It was found that the position of the first groove relative to the entire chordal cross section of the wing gradually moves backward, which has an effect on the flying aerodynamic behaviors of the beetle. Next, three corrugated airfoils learned from the microscopy imaging of the ladybird beetle hindwing were designed. Then, aerodynamic behaviors were calculated by the ANSYS Fluent software, and it was confirmed that the position of the first groove microstructure affects the aerodynamic performance of the airfoil. For further study, the influence of corrugated structural and motion parameters on the aerodynamic, 2D 'simplified' airfoil models with triangular wave airfoil models (TWA models) was developed and studied.Research Highlights The position of the first groove microstructure affects the aerodynamic performance of the airfoil. The pressure difference of different corrugation patterns shows significantly asymmetric during the upstroke and downstroke. The aerodynamic is optimal of 2D-TWA models, when the number of corrugations is five, the corrugation is right angle, and the flapping frequency is 75 Hz. A series of 2D corrugation airfoil models were designed from learned from microscopy imaging of the ladybird beetle hindwing, and the optimal corrugated structure aerodynamic parameterized combination was obtained. image