Design and Implementation of Airborne Hyperspectral Camera Control and Data Storage System

Abstract With the great progress of hyperspectral imaging technology, airborne hyperspectral cameras have been widely used in the field of earth detection and remote sensing. However, with the increasing resolution of airborne hyperspectral cameras, the amount of data acquired is also growing explosive, The speed and accuracy in the transmission process are easily affected, which poses challenges to the real-time control and data acquisition and storage of airborne hyperspectral cameras. In this paper, a general airborne hyperspectral image acquisition and storage system is designed, which converts the hyperspectral data from the Cameralink interface into a high-speed serial PCIe data stream and realizes high-speed storage of image data. The image width is 2048 pixels, the number of spectral segments is 120, the pixel size is 12bit, and the maximum frame rate is 300 fps. The maximum transmission rate is 2048×120×12bit×300fps, and the data rate is 844Mbps. Based on this, we perform thermal analysis and vibration analysis of the system platform. Experimental results show that the system can achieve stable data transmission and storage, and the data is intact and reliable.