Seismic Behavior Assessment of RC Buildings Controlled by Passive and Active Techniques

In this paper, a numerical study was carried out on the effectiveness of the active earthquake control method in improving the earthquake response of RC buildings. High damping rubber bearing design was made according to the criteria of the Uniform Building Code. Three different types of isolators were obtained geometrically. Passive earthquake control of the building was provided by placing these isolators under the columns. For active earthquake control of the building, controller design was realized by integrating it into the FE transient analysis in ANSYS. The active earthquake control design was studied using a force-based and displacement-based controller with acceleration and displacement feedback. The linear dynamic earthquake analysis in the time history of all three states of the building (un-controlled, passive, and active-controlled) was made using the acceleration record of the Seferihisar (İzmir) earthquake. When the results are examined, it is seen that the active earthquake control method provides almost all of the positive behavior expected from the passive earthquake control method. In addition, it eliminates some of the disadvantages of the passive earthquake control method.