Effects of ammonia combustion on skin friction characteristics for supersonic flow

Boundary layer combustion is an effective method to reduce friction in scramjet combustors. In existing research on drag-reducing fuels, hydrocarbons pose challenges related to carbon deposition and emissions. Meanwhile, hydrogen presents significant difficulties in storage and transportation. For the first time, this paper explores ammonia as a drag-reducing alternative. We employed the Reynolds-averaged Navier-Stokes (RANS) method to investigate the characteristics of drag reduction by ammonia combustion in supersonic flow. Numerical results indicate that the local drag reduction by ammonia combustion is better than hydrocarbon and worse than hydrogen compared to existing research. Ammonia exhibits superior potential for drag reduction. However, the overall drag reduction at room ammonia injection temperature is limited due to the significant distance between the ammonia self-ignition point and the injection port. To address this challenge, we proposed two optimization strategies: increasing the ammonia injection temperature and increasing the inlet ammonia decomposition ratio. As the ammonia injection temperature increases, the self-ignition position moves towards the inlet, and the combustion drag reduction region expands upstream. Interestingly, a higher ammonia inlet decomposition ratio does not necessarily lead to a better drag reduction effect. In fact, an excessively high decomposition ratio can inhibit the combustion drag reduction effect. The most effective drag reduction occurs when the ammonia inlet mass fraction is 50%, resulting in a 42.8% reduction in integrated drag compared to the case without NH3 injection. Overall, this paper offers critical insights into the utilization of ammonia combustion in scramjets to reduce drag.