Experimental Study on the Effect of Buffer Layer on the Explosive Drive of Reactive Fragment

Abstract In order to study the influence of the buffer layer on the explosive drive of the reactive fragment, for the reactive fragment warhead of the same structure, the warhead static explosion test and the break-through target test method were used to test the fragment integrity and the fragment integrity of the reactive fragment warhead of the reactive fragment warhead with several different thickness silicone rubber buffer layers. The initial velocity of the fragment was measured, and its integrity and the variation law of the initial velocity were analyzed. The results show that with the increase of the thickness of the buffer layer, the integrity of the reactive fragments increases. When the thickness of the buffer layer is 2 mm, the fragment integrity rate is zero, and when the thickness of the buffer layer is greater than 8 mm, the integrity rate is greater than 0.85. The difference in the initial velocity of the warhead of the same reactive fragment is small, mainly because with the increase of the thickness of the buffer layer, the initial velocity of the fragment decreases mainly because the loading ratio of the warhead decreases; the buffer layer has a significant effect on reducing the initial velocity of the reactive fragment, and k=0.83 can be used The modified Gurney formula was used to estimate the initial velocity of the reactive fragments of the silicone rubber buffer layer.