Modelling of Creep Rupture in Grade 92 Steel Using a Microstructure-Type Finite Element Mesh

Conventional finite element (FE) modelling, which employed structured mesh, is unable to simulate local damage evolution at microstructure level. This paper aims to investigate the creep rupture and damage behaviour of Grade 92 steel under a creep environment using microstructural-type FE mesh. The idealised microstructures of the material were generated based on the Voronoi tessellation technique. Three notched bar specimens with different notch acuities were modelled in Abaqus v6.13 software and a ductility exhaustion based damage model was employed to estimate the damage state. The influence of the notch constraint on the ductility is accounted for in the simulation. It is found that the results obtained from the proposed technique are in good agreement with the experimental data. All the prediction points fall within the scatter band of +/- factor of 2. The damage was predicted to initiate at a distance offset from the notch tip. As the acuity increases, the damage initiation site shifts further away from the notch.