Using Ray Tracing to Improve Bridge Monitoring With High-Resolution SAR Satellite Imagery

While satellite persistent scatterer synthetic aperture radar (SAR) interferometry is an effective technique to monitor the health of structures via selection of long-term coherent pixels, detailed interpretation of displacement measurements requires knowledge of which surfaces, the reflection is coming from. Ray tracing algorithms can be used to simulate SAR backscatter for structures, and link observed PS pixels to specific parts of structures. We investigate the reflectivity of three bridges in London for a high-resolution TerraSAR-X dataset, using a ray tracing technique. Artificial reflectors are mounted on one of the bridges. We compare the simulated backscatter with the location of points selected as PS pixels using a stack of 38 TerraSAR-X images. The results confirm that we can predict overall scattering behavior of a bridge using SAR simulation techniques when we have access to a 3-D model of the structure. However, the results of simulation depend on the level of details in the 3-D model and a high-detailed 3-D model including corner reflectors allows the ray tracing technique to perfectly simulate position of the strong scatterers. This approach can help designers increase the SAR reflectivity of a bridge in the design phase of structural bridge assets, or in a retrofit phase, by installing artificial reflectors. We also link the strong scatterers in the reflectivity map to the corresponding scattering surfaces in the structural model that contributed to the signal. This allows the end-users of the InSAR products to better understand which sections of a bridge are moving when a PS pixel indicates displacement.