Thermoluminescence behavior of Ce3+ doped lanthanum tri-borate phosphor for dosimetry applications

The combustion method was used to synthesize Ce3+ doped LaB3O6 phosphors in a range of dopant concentrations. Both the un-doped and Ce3+ doped LaB3O6 samples matched the required reference card, according to X-ray diffraction patterns. TL glow curves of Ce3+ doped LaB3O6 samples at various dopant concentrations were examined by employing various optical detection filter combinations to define TL characteristics. LaB3O6:Ce3+ (1%) and IRSL-TL 565 nm were selected as the suitable sample and appropriate detection filter pairing. The TL maximum with a higher intensity was seen during preheating trials (with 2 °Cs−1) at around 270 °C. The experimental results showed feasible linearity (R2 = 0.998 and b = 1.054) between 5 and 1000 Gy for the dose response of LaB3O6:Ce3+ (1%). The short-term fading test was conducted at various time intervals up to a week. The findings showed that the dosimetric peak strength was almost constant for up to 5 days. However, an additional spurious maximum appeared at the higher temperature zone. Each sample showed an abnormal heating rate effect, which can be explained by localized electrons caught in the intermediate excited state, which is capable of radiative transitions via the conduction band. To find the overlapping peak numbers and determine the kinetic parameters of preheated LaB3O6:Ce3+ (1%), various heating rates, TM-Ts, initial rise, and computerized glow curve deconvolution techniques were utilized. The results suggest that LaB3O6:Ce3+ may be an appropriate material for TL dosimetry applications due to its efficient TL characteristics.