Improving low-cycle fatigue life of ZK61 magnesium alloy via basal texture weakening by the compression-extrusion process

In response to the problem that intense basal texture seriously affects the low-cycle fatigue life of magnesium alloys, the compression-extrusion process for basal texture weakening was implemented in ZK61 magnesium alloys. The low-cycle fatigue life under uniaxial symmetrical tension-compression cyclic loading was dramatically improved by basal texture weakening, up to 1.5 similar to 3 times that in an intense-textured state. Basal texture weakening promoted basal slip to dominate the cyclic deformation, thus significantly reducing the cyclic tension-compression asymmetry caused by the {10-12} twinningdetwinning. Further, the suppression of {10-12} twinning and the decrease of compressive plastic strain slowed down dislocation accumulation inhibiting the cyclic hardening and fatigue crack initiation. The Manson-Coffin equation was feasible to predict the fatigue life of the intense-textured and weak-textured ZK61 magnesium alloys. The promotion of basal slip arising from basal texture weakening led to the decrease of fatigue ductility coefficient and the increase of fatigue ductility exponent contributing to the higher fatigue life. (c) 2023 The Author(s). Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).