Forest Fire Risk Zone Mapping in Mizoram Using RS and GIS

Abstract In recent years, India’s Northeastern territory has been plagued by wildfires. Mizoram, as per FSI, has been among the most affected regions, with approximately 20,744-recorded wildfires. Forest fire directly or indirectly affects human health, climate change, and the environment. The forest fire risk zonation is generated utilizing remote sensing data, and Geographic Information System based on specified physical and socioeconomic factors. As part of the current study, a Geographical Information System is employed to determine forest fire risk based on predetermined physical and socioeconomic parameters. This study used three distinct models of fire risk zonation index namely FRI (Fire Risk Index), HFI (Hybrid Fire Index), and SFI (Structural Fire Index) to identify the zones in the study area under the risk of forest fires. The Indian state of Mizoram is categorized into five distinct hazard zones based on the probability of wildfire incidents. Fire alerts generated using risk models, and real-time hotspot datasets (forest fire spots) received from MODIS and USGS have been validated. According to the study’s findings, 18.84 km2 of the study area is at low risk of forest fire, 11.072 km2 is at moderate risk, and 5.38 km2 is at high risk. The probability from each metric varies since the input and weightage of the different parameters vary from one another. SFI, therefore, therefore predicts a lower frequency of high-risk wildfire-prone zones than HFI and FRI. In this research, the coefficient of discrimination (R2) is employed to assess the reliability of the projected fire indices being compared with real-time hot spots. Here, FRI possesses the highest accuracy (R2=0.892), HFI has moderate accuracy (R2=0.676), and FRI has the lowest accuracy (R2=0.629).