Application of a high-speed infrared thermographic camera to the study of HAZ softening in S960 welded joints

Hot strip rolling of low-carbon advanced high-strength (AHS) sheet steels is difficult because their products require specific chemical compositions to achieve excellent mechanical properties. The formation of a heat-affected zone (HAZ) during welding is therefore a challenge in terms of maintaining high strength values. This fact complicates the formation of the softening area when the hardness in the HAZ rapidly decreases. According to the continuous cooling transformation diagram (CCT), the chemical composition of the base metal is directly related to the fine-grained martensitic microstructure arising from very high cooling rates and microalloying up to 0.2 wt% by Nb, V, and Ti. The gas metal arc welding (GMAW) was used to perform the study, what presents a challenge for thin sheets because of very narrow HAZ formation, suscepible to HAZ softening phenomenon. The width of the HAZ was about 6 mm and determined by applying an infrared thermographic camera to measure the real-time temperature development. The significant reduction in microhardness, known as the softening phenomenon, occurred in the intercritical heat-affected zone or at the boundary between intercritical and subcritical HAZ, according to real-time diagnostics of the temperature development and the microhardness results. The amount of heat produced during welding plays an important role in this context and is directly connected to the heat input of the welding process. The softening area can be reduced and its impact on the mechanical properties can be lowered by appropriately modifying the welding conditions, e.g., optimising the heat input. The purpose of this paper is to point out the change in temperature during the welding process.