FED evaluation in a small double-suction reversible pump turbine considering sediment erosion

Double-suction pump-turbines are a special type of reversible pump-turbine which serves the pumped storage hydro power plant. Enhancing the energy conversion efficiency of the power station can be effectively achieved by reducing the internal Flow Energy Dissipation (FED) within the pump-turbine. The key to addressing this challenge lies in the identification of high FED regions and conducting visualized analyses. In this study, computational fluid dynamics (CFD), thermodynamic calculation methods and the Finnie erosion model are combined to perform two-phase flow numerical simulations of a specific double-suction pump-turbine model under both pump and turbine operating modes. We analyzed the FED in different regions off wall. The energy loss distribution is provided within these five regions for the volute casing, suction chamber, and impeller separately, and conducted an analysis of component wear. The research findings revealed that, in the pump mode, FED primarily concentrates within the volute casing, while in the turbine mode, it is concentrated within the suction chamber, with both regions accounting for over 70 % of the total energy dissipation. The proportion of internal FED in five regions at varying distances from the wall for each component showed significant disparities under different operating conditions, closely related to the internal flow characteristics of the components. In pump mode, wear primarily occurs in the volute casing, while the wear in the suction chamber and impeller can be considered negligible. In turbine mode, each component experiences some level of wear. This provides a foundation for reducing flow energy losses and preventing sediment erosion.