Coke formation pathway under various reaction conditions during the production of syngas in a dielectric barrier discharge plasma environment using CeO2 nanorods supported Ni catalysts

Plasma-assisted dry reforming of methane (DRM) was investigated using CeO2 nanorods (NR) supported Ni catalysts in a fixed-bed coaxial dielectric barrier discharge (DBD) reactor. This study individually examined the catalyst support, packing material, and 10 wt% Ni-CeO2 NR catalyst under pure thermal and plasma-assisted thermal DRM environments to explore the plasma-thermal synergy. Support and packing material displayed no discernible reactivity under thermal DRM within 450 degrees C; however, the catalyst exhibited reactivity beginning around 350 degrees C. Alternatively, plasma-assisted DRM experiments revealed a distinct reaction occurrence at significantly lower temperatures across all sample types. Introducing plasma demonstrated a significant enhancement in CH4 conversion compared to CO2 conversion. The 10 wt% Ni-CeO2 NR catalyst in plasma-assisted DRM testing showed increasing conversions of CH4 and CO2 with rising temperatures, peaking at 52.1 % and 46.1 %, respectively, at 450 degrees C. The catalyst's improved performance in the plasma environment can be attributed to the enhanced metal-support interaction between NiO and the CeO2 NR support, a consequence of the rich surface oxygen vacancy concentration. However, this increase in conversion was accompanied by an escalation in carbon deposition. Considering contributions from the thermal DRM process, the optimal operating temperature was determined as 350 degrees C. Increasing plasma power at this temperature led to enhanced conversion. However, beyond a threshold of 23.8 W power, the reaction path altered, resulting in reduced syngas output. Increasing the CH4:CO2 feed gas flow ratio, while maintaining constant plasma power and temperature, elevated H2/CO generation. Moreover, increasing the total flow rate under identical conditions, with a constant feed gas flow ratio, reduced both conversions due to decreased chemical residence time. Consequently, under a constant feed gas ratio, a higher syngas yield is achievable with lower overall flow rates.