An eco-friendly extraction method to obtain pectin from passion fruit rinds (Passiflora edulis sp.) using subcritical water and pressurized natural deep eutectic solvents

This work evaluated the efficiency of Subcritical Water Extraction (SWE) and Pressurized Natural Deep Eutectic Solvents (P-NaDESs) under different temperatures (100, 120, 140 and 160 degrees C) in obtaining pectin from Passion Fruit Rinds (PFR) and its residual biomass (PFR - UAPLE), and compare the results with those of Conventional Extraction (CE). The highest pectin yields, 19.1 and 27.6 %, were achieved using P-NaDES (Citric Acid:Glucose: Water) at 120 degrees C for PFR and its PFR-UAPLE, respectively. Regarding the Degree of Esterification (DE), pectin obtained with SWE and CE had DE below 50 %, while with P-NaDES (Citric Acid: Glucose:Water), DE was above 50 %. Higher Molecular Weights (MW) (98 and 81 kDa) were obtained with SWE and P-NaDES from PFR compared to PFR-UAPLE and CE. Galacturonic acid was the most abundant (74 to 78 %) monosaccharide obtained by SWE. In terms of morphology, water extraction provided pectin with more uniform textures, whereas extraction with acidified mixtures led to more heterogeneous surfaces. Overall, comparing SWE and P-NaDES, the obtained pectins differed in terms of monomeric composition, MW and DE. These results indicate that pectins obtained by both methods can have different applications depending on their structural characteristics.