Controlling mechanical properties and energy absorption in AlSi10Mg lattice structures through solution and aging heat treatments

The use of Selective Laser Melting (SLM) has gained popularity due to its ability to produce complex-shaped parts, which includes lightweight lattice structures that are appealing to a variety of industries. AlSi10Mg alloy is a favored choice for SLM due to its excellent specific properties. The utilization of AlSi10Mg in lattice structures further reduces their mass while enhancing specific mechanical properties. However, the inherent brittle deformation behavior of as-built AlSi10Mg restricts the energy absorption potential of lattice structures. This study explores the control of mechanical properties and energy absorption in AlSi10Mg lattice structures and bulk tensile samples through solution and aging heat treatments, examining their impact on microstructural transformations. The results show that solution heat treatment decreases the mechanical properties of lattice structures and bulk tensile samples while improving their ductility and energy absorption. This change is attributed to the transformation of the alloy's fine cellular microstructure into coarser Si-precipitates. Subsequent aging treatments lead to increased mechanical properties in lattice structures solution heat treated at 500 and 550 degrees C, albeit with a slight reduction in energy absorption. Intriguingly, lattice structures heat treated at 460 degrees C exhibit unchanged mechanical properties and energy absorption, as confirmed by the t-test. Additionally, the absence of the Al5FeSi intermetallic phase suggests that aging did not occur following solution heat treatment at 460 degrees C. These findings offer valuable insights into manipulating the mechanical properties and energy absorption of AlSi10Mg lattice structures through controlled heat treatments. Such control can significantly enhance the performance and functionality of lattice structures in practical applications.