Quantitative profilometric measurement of magnetostriction in thin-films

A DC non-contact method for measuring the magnetostrictive strain in thin-films is demonstrated, achieving a state-of-the-art sensitivity of 0.1ppm. In this method, an optical profilometer is used to measure the curvature induced in a magnetostrictively coated coverslip under a DC field through phase-sensitive interferometry. From this the magnetostrictive stress and strain are calculated using Stoney’s formula. This addresses limitations of conventional techniques that measure magnetostriction based on the deflection of a cantilever under an AC field, which require complex dedicated set-ups and are sensitive to vibrational noise. Further, it reveals information about the anisotropy of the film and allows for the possibility of measuring multiple samples simultaneously. The theoretical sensitivity limits are derived, predicting a shot-noise-limit of 0.01ppm. The method is implemented to measure the magnetostrictive hysteresis and piezomagnetic coupling of thin-film galfenol. Degradation in film performance is observed above a thickness of 206 nm, alongside a change in coercivity. This prompts investigation into the growth and optimization of galfenol films for use in devices.