First report on BTEX leaching from waterpipe tobacco wastes (WTWs) into aquatic environment

Waterpipe tobacco wastes (WTWs) may contain considerable levels of hazardous contaminants such as BTEX (benzene, toluene, ethylbenzene, o-xylene, and m/p-xylene). However, no research has been carried out on BTEX levels in WTWs and the release of these pollutants into the water environment. This research examined the levels of BTEX in WTWs of flavored/local tobacco and also the release rate of these toxins into three kinds of water, including seawater (SW), tap water (TW), and distilled water (DW) with different leaching times (15, 30 min, 1.2, 4, 8 h, and 1, 2, and 4 days). The mean contents of BTEX in WTW samples of Al-Mahmoud, Al-Fakher, Mazaya, AlAyan brands, and local tobacco samples were 17.0 +/- 4.14, 19.1 +/- 4.65, 19.6 +/- 4.19, 18.8 +/- 4.14, and 3.16 +/- 0.63 mu g/kg, respectively. The mean BTEX levels in flavored tobacco samples were considerably greater than that of local tobacco (p < 0.05). The WTWs leaching experiments showed that the levels of BTEX ranged from 5.26 to 6.12, 5.02-5.60, and 3.83-5.46 mu g/L in DW, TW, and SW, respectively. All target compounds were found for all exposure times in DW, TW, and SW samples. After adding sodium azide as an antibacterial agent to water samples (simulating biodegradation processes), higher levels of BTEX compounds were detected in SW. Further research is needed to address the potential environmental hazards due to WTWs leaching into aquatic environments.