Organic vapor sensing behaviors of 4D printed thermoplastic polyamide elastomer by selective laser sintering
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T(2023)
Abstract
Thermoplastic polyamide elastomer (TPAE) films were prepared by selective laser sintering technology and their organic vapor sensing behaviors were investigated. The stable responsive electrical signal was attributed to the conductive pathways evolution formed by polyetheramine soft segments. And the response behaviors of the TPAE films were evaluated using organic vapors of different polarities. Unlike conventional materials that only respond to some specific organic vapors, TPAE showed a high negative vapor coefficient (NVC) effect for all tested vapors. Rapid response, high responsivity and good repeatability were observed in continuous immersion drying run (IDR) experiments at 20 degrees C. The sensing behaviors during the breathing tests showed a good discrimination for different ethanol vapor concentrations. This study not only provides a guidance for the preparation of organic vapor sensors with fast response, high responsivity and stable repeatability, but also provides a strategy to broaden the application of TPAE into 4D printing field.(c) 2023 The Author(s). Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).
MoreTranslated text
Key words
4D printing,Selective laser sintering (SLS),Thermoplastic polyamide elastomer (TPAE),Organic vapor sensing performance
AI Read Science
Must-Reading Tree
Example
![](https://originalfileserver.aminer.cn/sys/aminer/pubs/mrt_preview.jpeg)
Generate MRT to find the research sequence of this paper
Chat Paper
Summary is being generated by the instructions you defined