Effect of radiation on laminar flame speed determination in spherically propagating NH 3-air, NH 3 /CH 4-air and NH 3 /H 2-air flames at normal temperature and pressure

The use of spherically propagating flames is common for measuring the laminar flame speed in NH 3 air, NH 3 /CH 4 -air and NH 3 /H 2 -air mixtures. However, the radiation-induced uncertainty in such mixtures has not been thoroughly investigated. Due to the low laminar flame speed of ammonia mixtures, it is anticipated that the radiation effect is considerable for such mixtures. This study aims to fill this gap by conducting numerical simulations using different chemical mechanisms and the adiabatic and optical thin radiation models to examine the effects of radiation on spherically propagating NH 3 -air, NH 3 /CH 4 -air and NH 3 /H 2 -air flames. The simulations are performed for mixtures at normal temperature and pressure ( T u = 298 K and P = 1 atm) and wide range of equivalence ratios. The radiation-induced uncertainty in spherical flames is quantified and compared to planar flames. The importance of the radiation-induced flow and thermal effects in spherical flames is compared between different mixtures and a correlation is developed to determine the radiation-corrected flame speed for spherical NH 3 -air flames. Considering the radiation effect in NH 3 -air, it was found that using different mechanisms results in considerable discrepancies in laminar flame speed determination. Some mechanisms showed that the radiation-induced flame speed in spherical flames was underpredicted by more than two times compared to planar flames, and the radiation-induced uncertainty for lean and rich spherically propagating NH 3 -air flames exceeds 20%. However, the radiation-induced uncertainty at normal temperature and pressure in spherically propagating NH 3 /CH 4 -air and NH 3 /H 2 -air flames was less significant, not exceeding 11%. Finally, an updated correlation is proposed to determine the radiation-corrected flame speed for NH 3 -air flames that can be directly used in spherical flame experiments measuring the laminar flame speed. (c) 2023 The Author(s). Published by Elsevier Inc. on behalf of The Combustion Institute. This is an open access article under the CC BY license ( http://creativecommons.org/licenses/by/4.0/ )