Origami-inspired self-deployable reflectarray antenna

Reflector antennas, operating at high frequencies, require a high surface accuracy: deviations from the target geometry accuracy result in a loss of RF performance (e.g., antenna gain and efficiency). As a result, the aperture may need to be larger, or a more complex backing structure must be engineered to achieve the reflector surface accuracy to deliver the equivalent gain of an efficient solid reflector. This would typically increase the mass, the stowed volume, and the design complexity. The design of larger aperture deployable antennas (e.g., Cassegrain, Offset) for SAR (Synthetic Aperture Radar) applications can be challenging for missions where platform size and payload mass are limited.Inspired by the Origami based techniques, Oxford Space Systems (OSS) is currently developing an innovative SAR Reflectarray antenna, targeting the X-Band frequency range, with the aim of achieving a relatively large aperture from a small, stowed volume suitable for a small satellite. The Reflectarray antenna architecture has several potential advantages over other antenna designs. It is a cost-competitive technology with excellent stowage efficiency, which can be further improved with origami-based folding mechanisms/kinematics. It requires a simplified deployment mechanism and in contrast to conventional parabolic reflectors, it does not need a separate backing structure.Until now, work on space deployable Reflectarray antennas (e.g., MARCO, OMERA and ISSARA missions from NASA) have focused on multi-degree of freedom structures, i.e., independent self-actuated hinge driven architectures. This paper presents an elegant single degree of freedom, origami-inspired Reflectarray architecture that does not require actuation on all the hinges. Thanks to its Hold-Down Release Mechanism (HDRM) and springloaded hinges, the OSS Reflectarray antenna is self-deployable. It maintains the required flatness accuracy achieved through its novel hinge integrated latching system.The OSS Reflectarray antenna has an 8:1 footprint stowage ratio, which enables installation on small satellite platforms (between 50 kg and 100 kg). The reflectarray has been designed to work in the X-band frequency with dual linear polarization for the concept study. However, the architecture can be scaled up or down to suit other frequency bands, making the OSS Reflectarray compatible with many applications and platforms.