Enhanced Soil Moisture Management Using Waste Green Algae-Derived Polymers: Optimization of Application Rate and Mixing Depth

Water scarcity poses a formidable challenge to agricultural productivity in arid regions, and water retention agents offer promising potential in this regard. Therefore, this study proposes developing and preparing polymers with water retention properties using waste green algae as raw material to explore the effectiveness of enhanced water infiltration and reduce evaporation at different use levels (0%, 0.15%, 0.30%, 0.45% and 0.60%) and maximum mixing depths (10 cm, 20 cm, 30 cm, 40 cm and 50 cm) and determine the optimum management. The results demonstrate that the synthesized polymers exhibited a remarkable swelling rate of 143.6 g/g, along with reusability and excellent temperature stability. The polymer application rate was positively correlated with infiltration duration, with an increase from 161 min to 750 min as the application rate rose from 0% to 0.60%. Concurrently, cumulative infiltration increased from 22.6 cm to 31.1 cm, showcasing the benefits of the polymer in enhancing water retention. Intriguingly, cumulative evapotranspiration initially decreased and then increased with increasing polymer application rates. Moreover, increasing the maximum mixing depth from 10 to 50 cm while maintaining the 0.3% application rate increased the cumulative infiltration (from 22.6 cm to 31.1 cm) and infiltration rate (from 0.03 cm/min to 0.08 cm/min) while decreasing the cumulative evaporation (from 44.4 mm to 31.7 mm). Considering the cumulative infiltration, infiltration rate and evapotranspiration characteristics, an optimized polymer application rate of 0.27% at a mixing depth of 0-50 cm was recommended for efficient soil moisture management. This study highlights the potential of green algae-derived biodegradable polymers as a win-win strategy for achieving waste alleviation of water scarcity in drylands, particularly for maize and wheat cultivation in northern China.