Mathematical Modeling of Alkaline Direct Glycerol Fuel Cells

Mathematical modeling and computer simulation are tools of great importance for the development of fuel cells. Thus, the objective of this work is to carry out the kinetic modeling of glycerol oxidation in a DGFC (direct glycerol fuel cell), considering two different approaches: (1) realistic phenomenological models for the partial oxidation of glycerol in Pt/C, considering its adsorbed intermediates; (2) models of artificial neural networks (ANN-artificial neural networks) for oxidation mainly of PtAg/C and PtAg/MnOx/C. The models were fitted to experimental data already available for validation and determination of their parameters, both using Matlab software, v. R2018a (MathWorks, Natick, MA, USA). Results for the phenomenological models developed showed excellent fits for the polarization curve, with an RMSE (root mean squared error) value on the order of 0.352 to 0.404 mA/cm2, in addition to coverage fractions consistent with the literature for the adsorbed species. The kinetic parameters with the greatest influence on the response of the models were those associated with the consumption of glyceric acid and the formation of tartronic acid and with the dissociative adsorption of water and the formation of Pt-Oads active sites. Regarding the neural models, excellent prediction fits were obtained for all of them, with RMSE values on the order of 0.008 to 0.014 mA/cm2, indicating the possibility of representing the functional interdependence between input variables and the density cell current for cases where it would be too complex to do so via mechanistic modeling (i.e., for PtAg/C and PtAg/MnOx/C oxidation).