Dual-doping for enhancing chemical stability of functional anionic units in sulfide for high-performance all-solid-state lithium batteries

The sulfide-based solid-state electrolytes (SEs) reactivity toward moisture and Li-metal are huge barriers that impede their large-scale manufacturing and applications in all-solid-state lithium batteries (ASSLBs). Herein, we proposed an Al and O dual-doped strategy for Li3PS4 SE to regulate the chemical/electrochemical stability of anionic PS43- tetrahedra to mitigate structural hydrolysis and parasitic reactions at the SE/Li interface. The optimized Li3.08Al0.04P0.96S3.92O0.08 SE presents the highest sigma(Li+) of 3.27 mS cm(-1), which is similar to 6.8 times higher than the pristine Li3PS4 and excellently inhibits the structural hydrolysis for similar to 25 min @ 25% humidity at RT. DFT calculations confirmed that the enhanced chemical stability was revealed to the intrinsically stable entities, e.g., POS33- units. Moreover, Li3.08Al0.04P0.96S3.92O0.08 SE cycled stably in Li//Li symmetric cell over 1000 h @ 0.1 mA cm(-2)/0.1 mA h cm(-2), could be revealed to Li-Al alloy and Li2O at SE/Li interface impeding the growth of Li-dendrites during cycling. Resultantly, LNO@LCO/Li3.08Al0.04P0.96S3.92O0.08/Li-In cell delivered initial discharge capacities of 129.8 mA h g(-1) and 83.74% capacity retention over 300 cycles @ 0.2 C at RT. Moreover, the Li3.08Al0.04P0.96S3.92O0.08 SE presented >90% capacity retention over 200 and 300 cycles when the cell was tested with LiNi0.8Co0.15Al0.05O2 (NCA) cathode material vs. 5 and 10 mg cm(-2) @ RT.