Investigation of the performance of cement-stabilized magnesium slag as a road base material

The harmless, resource-saving, and large-scale utilization of magnesium slag (MS) from industrial waste has become an important topic for road research. The use of MS as a substitute for aggregate is a practical and efficient way to dispose of it. However, there is a lack of systematic research on how to standardize its use in road construction. The objective of this study was to investigate the applicability and feasibility of using MS for cement stabilized base course materials. The influence of different cement dosages, curing age, and gradation on the strength, stiffness and stability of cement-stabilized magnesium slag mixture (CMSM) was investigated, and the actual road performance of CMSM was analyzed by paving a test road. The results showed that the mechanical properties of the CMSM met the requirements for road base courses under medium-to-light traffic when the cement dosage was above 5%. The unconfined compressive strength loss rate of the CMSM was less than 13% for an immersion time of 1 to 7 days, and after 5 freeze-thaw cycles, the frost resistance coefficient of the CMSM was more than 85%. The performance of the CMSM was most affected by cement dosage and curing age, closely followed by mixture grading type. MS can enhance the development of the pozzolanic reaction, resulting in improved strength and compactness of CMSM. Overall, CMSM exhibited exceptional road performance and could reduce aggregate costs by 25% to 35%. The use of MS as an aggregate for road base courses offers a sustainable solution that not only maximizes the use of solid wastes, but also avoids the potential safety hazards and environmental pollution caused by improper disposal and stockpiling of MS.